TV Floor Stand Mount DVD Shelf For 32 42 50 55 60 65 RCA. When buying a Samsung LED TV stand, you also get all of the screws and tools required to install it. To get started, you will need the screws from the box, phillips head screwdriver, Guide Stand, and Stand Base. If the stand comes assembled, then you can skip to the stand installation portion of this guide. If it does not come assembled, then you will need to assemble the guide stand to the stand base before attaching the assembled stand to the television. Note: This is a general guide, a PND8000 was used in this example, your TV may have a similar or different stand, please refer to the user manual for more complete instructions for your individual model. Note: For removal of stand, please follow the instructions in reverse orders. The Stand Base is on TOP in this photo, the Guide Stand is on the BOTTOM. They are joined by 4 screws. Below are instructions to assemble the stand before attaching the stand for the TV. Step 1: Align the Guide Stand with the Stand base as shows above. The 4 screw holes will line up. The extended tab on the curved portion of the guide stand will align with the curved portion of the stand base. Step 2: This is the front of the guide stand, this end fits into the TV during final assembly. Place two screws into the indicated holes. Finger tighten until screws have been places and seated correctly. Move to Step 3 Step 3 This is the back of the guide stand. Place 2 screws into the indicated holes. Finger tighten until screws have been placed and seated correctly. Move to step 4. Step 4: This is the guide stand attached to the stand base will the 4 screws. Use your phillips head screwdriver to HAND tighten all screws. Do not apply more pressure than is needed or you will will strip the threading in the screw holes. We have now finished assembling the guide stand to the stand base, and are now read to assemble the stand to the TV. How to attach your stand to your TV Below are instructions to attach the stand assembly to the TV. If you want to remove the stand assembly from the TV for transportation or wall mounting purposes, please follow the directions in a reverse order, placing the tv on a soft surface before removing any screws. Step 1: Lay your TV screen down on a soft surface such as a couch or bed Note: Make sure that the televisions bezel is supporting the TV’s weight while laying down, Also make sure there is nothing that can puncture or apply pressure to the panel. If there is this will damage your screen and will not be covered under warranty. Step 2: Line up the notches in the stand with the slots on the TV, using the notches as a guide. Step 3: Slide the stand into place. Step 4: Screw the (4 on this model) screws into place. Use your phillips head screwdriver to HAND tighten all screws. Do not apply more pressure than is needed or you will will strip the threading in the screw holes. Step 5: Your stand will now be firmly attached to the television and ready for use.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |